OffGrid comes with 16 Factory presets on board to help you start your musical journey!
The Factory Presets are grouped into four Columns and arranged by numbers to the correspondingly numbered PADS in those columns.
You can hold the SHIFTER 1 button to display the currently active PRESET and its position in the Factory Bank.
Changing a preset is as easy as hitting a PAD while holding the SHIFTER 1 button.
The preset groupings are as follows:
INS - Instruments
Presets in the 1st column - Presets 1, 5, 9, 13 are best suited for playing dynamic Instruments (such as Piano, Rhodes, Bassline Leads, Pads, etc…).
DRM - Drums
Presets in the 2nd column - Presets 2, 6, 10, 14 are intended for playing Drums and percussion Instruments.
MTN - Motion
Presets in the 3rd column - Presets 3, 7, 11, 15 are intended for modulation using OffGrid’S Motion Controller.
MPE - MIDI Polyphonic Expression
Presets in the 4th column - Presets 4, 8, 12, 16 are intended for MPE compatible Apps.
INS - Instruments
INS-Default (Pad 1)
This preset is the default for playing OffGrid, it will be loaded initially when connecting to a host device.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
Press and Hold the Shifter 1 button to see the currently active Preset Slot in the Factory Bank. |
Aftertouch: |
Enabled / Linear |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
0-detent = 0 Modulation Hard Left = 127 Hard Right = 127 |
Joystick |
Pitchbend |
0-detent = 0 Pitchbend Top Position = Maximum positive Pitchbend Bottom Position = Maximum negative Pitchbend |
Motion Control |
CC 103 |
0°-90° Range of motion |
Motion Control |
CC 106 |
0°-90° Range of motion |
Motion Control |
CC 102 |
0°-90° Range of motion |
Motion Control |
CC 105 |
0°-90° Range of motion |
Pad A |
CC 51 / CC 52 |
Toggling states to reproduce expected Transport Button behavior in DAWs |
Pad B |
CC 50 + GarageBand |
INS-HighVelocity (Pad 5)
This preset is nearly identical to INS-Default, the difference is in the impact velocity response of the PADS for Instruments that require a lower dynamic range.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Enabled |
|
Velocity |
High |
Higher initial impact velocity |
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
CC 103 |
|
Motion Control |
CC 106 |
|
Motion Control |
CC 102 |
|
Motion Control |
CC 105 |
|
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
INS-NoAftertouch (Pad 9)
This preset is identical to INS-Default but disables Aftertouch for Instruments that are not Aftertouch enabled, and/or to conserve data bandwidth when playing MIDI over Bluetooth LE.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Disabled |
Aftertouch disabled |
Velocity |
High |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
CC 103 |
|
Motion Control |
CC 106 |
|
Motion Control |
CC 102 |
|
Motion Control |
CC 105 |
|
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
INS-LiteMode (Pad 13)
A lightweight configuration of the INS-Default preset. Aftertouch and Motion Control are disabled for the fastest response and lowest data bandwidth use over Bluetooth LE.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Disabled |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
DRM - Drums
DRM-Default (Pad 2)
This is the default preset for playing GM Drum Mapped drums and beat-making themed Apps using OffGrid’s Motion Controller. This preset is particularly useful for motion control of the Filter effect in the Koala Sampler App due to a Joined-axis behavior of the Motion Controller and a quasi center-detent MIDI value in OffGrid's absolute horizontal position.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 36 / C1 |
|
Aftertouch: |
Disabled |
|
Velocity |
Drum-Velocity (Mid level) |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
CC 105 |
0°-90° Range of motion |
Motion Control |
CC 105 |
0°-90° Range of motion |
Pad A |
CC 51 |
|
Pad B |
CC 50 |
DRM-HiDynamic (Pad 6)
This preset is for playing GM Drum Mapped drums and beat-making themed Apps that require a higher impact velocity response.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 36 / C1 |
|
Aftertouch: |
Disabled |
|
Velocity |
High |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 |
DRM-Aftertouch (Pad 10)
This preset is in all regards identical to DRM-Default but includes Aftertouch data. The ROLL motion detection exhibits a Joined-axis behavior which is perfect for center-detent effects in OffGrid's absolute horizontal position.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 36 / C1 |
|
Aftertouch: |
Enabled |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
CC 105 |
0°-90° Range of motion |
Motion Control |
CC 105 |
0°-90° Range of motion |
Pad A |
CC 51 |
|
Pad B |
CC 50 |
DRM-LiteMode (Pad 14)
A GM Drum Mapping preset with very little bandwidth usage. Motion Controls and Aftertouch are disabled.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 36 / C1 |
|
Aftertouch: |
Disabled |
Aftertouch Disabled |
Velocity |
Drum-Velocity (Mid-level) |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Motion Control |
Disabled |
No Motion Control data |
Pad A |
CC 51 |
|
Pad B |
CC 50 |
MTN - Motion
MTN-Default (Pad 3)
This preset makes use of OffGrid’s Motion Controller’s ROLL-detection for panning your sounds in a stereo-field with the MIDI reserved CC10 parameter.
It also uses the PITCH-detection for ModWheel controls (CC1).
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Enabled / Linear |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
CC 1 |
Joined-axis behavior |
Motion Control |
CC 1 |
Joined-axis behavior |
Motion Control |
CC 10 |
Joined-axis behavior |
Motion Control |
CC 10 |
Joined-axis behavior |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
MTN-ModExp (Pad 7)
This preset makes use of OffGrid’s Motion Controller’s ROLL-detection for controlling the reserved MIDI parameter for Expression. It also uses the PITCH-detection for ModWheel controls.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Enabled / Linear |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
CC 1 |
0°-90° Range of motion |
Motion Control |
CC 102 |
0°-90° Range of motion |
Motion Control |
CC 11 |
Joined-axis behavior |
Motion Control |
CC 11 |
Joined-axis behavior |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
MTN-Joined (Pad 11)
This preset is designed to make use of the Joined-axis behavior on ROLL and PITCH motion detection for a non-reserved MIDI mapping of your choice. The Joined-axis behavior has a default MIDI Value of 64 in the absolute horizontal position.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Enabled / Linear |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
CC 103 |
0°-90° Range of motion |
Motion Control |
CC 103 |
0°-90° Range of motion |
Motion Control |
CC 105 |
0°-90° Range of motion |
Motion Control |
CC 105 |
0°-90° Range of motion |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
MTN-Split (Pad 15)
This preset is designed for absolute freedom in mapping each of the Motion Controller’s detectable changes being: ROLL Right, ROLL Left, PITCH Up, PITCH Down, and mapping their range to separate MIDI CC Parameters.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Enabled / Linear |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
CC 103 |
0°-90° Range of motion |
Motion Control |
CC 106 |
0°-90° Range of motion |
Motion Control |
CC 102 |
0°-90° Range of motion |
Motion Control |
CC 105 |
0°-90° Range of motion |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
MPE - MIDI Polyphonic Expression
MPE-Default (Pad 4)
This preset is the default for MPE-enabled Apps. The Motion Controller’s detection is mapped to the MPE Expression parameter CC74 and ModWheel. Notes and parameters cycle through MIDI channels 2-to-16.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Enabled / Linear |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
CC 74 |
Joined-axis behavior |
Motion Control |
CC 74 |
Joined-axis behavior |
Motion Control |
CC 1 |
Joined-axis behavior |
Motion Control |
CC 1 |
Joined-axis behavior |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
MPE-Inverse (Pad 8)
This preset inverts the MTN-Default behavior of the Motion Controller’s mapping.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Enabled / Linear |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
CC 1 |
Joined-axis behavior |
Motion Control |
CC 1 |
Joined-axis behavior |
Motion Control |
CC 74 |
Joined-axis behavior |
Motion Control |
CC 74 |
Joined-axis behavior |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
MPE-PitchBend (Pad 12)
In this preset, the Motion Controller detection is mapped to MPE Pitchbend and Expression CC74.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Enabled / Linear |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
CC 74 |
Joined-axis behavior |
Motion Control |
CC 74 |
Joined-axis behavior |
Motion Control |
Pitch Bend |
Joined-axis behavior |
Motion Control |
Pitch Bend |
Joined-axis behavior |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
MPE-PitchInv (Pad 16)
An inversion of MPE-PitchBend.
Parameter |
Mapping |
Comment |
Root Note |
MIDI 48 / C2 |
|
Aftertouch: |
Enabled / Linear |
|
Velocity |
Default / Linear |
|
Joystick |
CC 1 / ModWheel |
|
Joystick |
Pitchbend |
|
Motion Control |
Pitch Bend |
Joined-axis behavior |
Motion Control |
Pitch Bend |
Joined-axis behavior |
Motion Control |
CC 74 |
Joined-axis behavior |
Motion Control |
CC 74 |
Joined-axis behavior |
Pad A |
CC 51 / CC 52 |
|
Pad B |
CC 50 + GarageBand |
Comments
3 comments
Good starting points :-) What MIDI Channel are the presets set to? Is it just MIDI channel 1 (except for the MPE of course)
Good point, thank you Andrew! All channels on the above presets except for MPE are set to CH1 by default. As soon as the WebEditor is launched those can be changed to anything else on a preset level.
I notice one thing that is quite weird and yet I kind of understand the purpose but think it should be different. That is the octaves up and down. I play keys so I could understand why it only moves 12 semi tones. I think that it should move 16 on this device because its less confusing on where you are when you go an octave up or down.
Please sign in to leave a comment.